Skip to content

Hospital management

Medical software ROI: how to measure it with KPIs

Measure medical software ROI with clinical, operational and financial KPIs, and calculate your system's costs, savings and benefits. Read the guide.

9 min read

Indicators for measuring the return on medical software

TL;DR: key points for measuring the return on a hospital system

  • Select five priority KPIs and measure their value before implementation.
  • Include licences, implementation, internal staff time and operation in the total cost.
  • Separate financial savings, freed-up capacity and avoided risks.
  • Compare equivalent periods and evaluate the project over a 36- to 60-month horizon.

Medical software ROI: a guide to measuring the return on a hospital system

The ROI of medical software measures the financial return on the investment in a hospital system. To calculate it, you need to compare the benefits attributable to its implementation with the total cost of the project over the same period, and complement that result with indicators of quality of care and operational efficiency.

An appointment slot left empty, a bed that takes too long to be assigned or a test that is repeated because nobody can find the result all carry a cost for the institution and for the patient. In this guide we review how to turn those situations into indicators, calculate their impact and verify what improvements the hospital system delivers.

What is the ROI of medical software and why is it important to measure it?

Return on investment, or ROI, expresses as a percentage the financial benefit obtained relative to the cost of acquiring and operating a technology solution. Measuring it helps justify the budget, check whether the project is meeting its objectives and decide which processes need adjusting.

At K2BHealth we start by identifying how much it costs to operate with current processes. Unbilled services, tests repeated for lack of information and hours spent on manual tasks are all part of that calculation. We measure the starting point so that we can later verify what has changed, without losing sight of patient safety and experience.

How do you calculate the ROI of a hospital management system?

ROI is calculated by subtracting the total cost of ownership from the financial benefits attributable to the project and dividing that difference by the same cost. Both values must correspond to the same time horizon.

What formula and costs should be used?

ROI (%) = [(cumulative financial benefits − cumulative TCO) / cumulative TCO] × 100

TCO, or total cost of ownership, brings together what it costs to get the system up and running and keep it operating. To calculate ROI, we add up the financial benefits before deducting the TCO: this way we avoid subtracting the investment twice. These are the costs we need to take into account:

Licensing

Licences or subscriptions during the period analysed.

Implementation

Configuration, migration, integrations, testing and go-live.

Infrastructure

Cloud or servers, security, backups and recovery.

Internal staff time

Hours of clinical and administrative staff spent on definition, testing and training.

Learning curve

Temporary drop in productivity: we recommend allowing for the first 4 to 8 weeks.

Ongoing operation

Support, updates and maintenance of catalogues and integrations.

How do we identify the financial benefits?

We work with a value tree that links each improvement opportunity to a KPI, a formula, a data source, its financial value and an owner. For example, recovering unbilled services requires checking what was performed, what was billed and what amount can be recovered. If an improvement has no data to support it, we keep it as an expectation pending validation.

To keep the calculation clear, we separate benefits into three categories:

  • Cash benefits: lower spending on overtime, fewer expired supplies or recovery of unbilled services. Additional revenue must take into account the costs associated with generating it.
  • Freed-up capacity: hours or resources available for other uses. They only become a financial benefit when there is a documented reallocation, such as seeing more patients or avoiding a planned hire.
  • Avoided risks: potential costs of adverse events or non-compliance. They are estimated using assumptions and ranges, and presented separately.

Separating the benefits helps avoid double counting. If the freed-up hours are used to see more patients, we should measure the financial benefit of that activity without also adding the theoretical value of those same hours.

How should the ROI result be interpreted?

Hypothetical example: if, at 36 months, the TCO is USD 150,000 and the attributable financial benefits add up to USD 210,000, the ROI is 40%. The figures show how the calculation works and do not represent results from our implementations.

We recommend presenting ROI together with the payback period and the net present value (NPV), which takes into account when the cash flows occur and the institution’s discount rate. We also work with conservative, base and optimistic scenarios to show how the result changes if costs or benefits deviate from what was expected.

Which KPIs can be used to measure the ROI of medical software?

KPIs should measure the clinical, operational and financial problems that prompted the investment. We recommend starting with five priority indicators that can be measured before implementation, each with a target and an owner. We choose that set according to the processes each institution needs to improve.

These are some of the indicators we can use to define the project’s priorities:

Clinical

Return to the emergency department within 72 hours

How to measure it: Discharges with a return within 72 hours / eligible discharges × 100. Complete the follow-up window.

What it helps evaluate: Continuity and outcomes of care, taking into account patient complexity.

Clinical

Missed doses

How to measure it: Missed doses / scheduled doses × 100.

What it helps evaluate: Adherence to medication administration, where there is a closed-loop recording process.

Operational

Non-attendance

How to measure it: Appointments not attended / appointments booked in the period × 100.

What it helps evaluate: Lost consultation capacity; define how cancellations and rescheduled appointments are treated.

Operational

Bed vacancy time

How to measure it: Time between discharge and the next admission, by bed and by ward.

What it helps evaluate: Delays in cleaning, availability and assignment.

Financial

Unbilled services

How to measure it: Billable services performed and recorded that remain unbilled at the agreed cut-off date.

What it helps evaluate: Revenue cycle losses, separating billing delays from omissions.

Financial

Expiry losses

How to measure it: Value of medicines and supplies written off due to expiry in the period.

What it helps evaluate: Costs associated with inventory management.

How can KPIs be linked to verifiable improvements?

Each indicator should help make a decision. If non-attendance falls, we check whether more consultations are carried out with the same staffing. If slots are still empty, the institution has recovered capacity but still needs to organise how to make use of it.

We also analyse the repetition of tests whose results are still valid: the information available and the alerts help identify requests that could be avoided. Clinical validation is essential, because repeating a test may be justified. We calculate the savings on the validated reduction in unnecessary tests and their avoidable cost.

How do you measure results before and after implementing the system?

A useful comparison requires knowing how the institution operated before the change. That is why we define the baseline before implementation and keep the same measurement rules throughout the project. If we start measuring once the system is already in use, it becomes much harder to demonstrate what has improved.

We organise measurement into five steps:

  1. Define each indicator. Document the formula, population included, exclusions, source, frequency, owner and target. If non-attendance was previously measured against confirmed appointments and afterwards against booked appointments, the results are not equivalent.
  2. Build the baseline. Review the quality of existing records. For times that nobody records, we recommend direct observation for 2 to 4 weeks; to assess experience, a short five-question survey that can be repeated.
  3. Record the context. Take into account patient volume, case complexity, staffing, agreements with payers and other changes. Not every improvement in the period can be attributed to the software.
  4. Separate the stabilisation phase. Measure and explain the first 60 to 90 days after go-live, distinguishing them from stable operation. Their costs must remain in the financial evaluation.
  5. Review and act. Collect data monthly and analyse quarterly trends. If the roll-out is carried out by module or by site, each stage needs its own baseline.

Which periods should be compared?

We use different periods depending on what we want to evaluate: the evolution of an indicator, the comparison of operations or the return on the project as a whole.

6 to 12 months

Depending on the KPI. To evaluate how indicators evolve and how consistent the improvements are.

12 + 12 months

The 12 months before and 12 months of subsequent stable operation. To compare results while controlling for seasonality and documenting the months included.

36 to 60 months

To evaluate the project’s financial return and recurring costs.

Hypothetical comparative example: going from 200 missed appointments out of 1,000 to 120 out of 1,000 reduces the rate from 20% to 12%. That is 8 percentage points, equivalent to a relative reduction of 40%. The result does not yet demonstrate additional revenue: the consultations carried out and their margin need to be verified.

How can data quality be checked?

We measure adoption from the outset: what proportion of records are completed in the system and how many are signed on the same day. If part of the work is still done on spreadsheets or paper, the dashboards show an incomplete picture of operations. Detecting those parallel workflows makes it possible to improve both the use of the tool and the quality of the data.

This monitoring is part of the digital transformation process, which includes diagnosis, objectives, implementation and continuous evaluation.

Which non-financial benefits should be included in the analysis?

Patient safety, ease of access to information and the time professionals can devote to care are also part of the system’s value. We include those benefits in the monitoring with their own indicators, even when we cannot yet assign them a monetary value.

  • Safety and quality: coverage of medication reconciliation, risk scales applied on time and completed surgical safety checklists.
  • Patient experience: waiting times, ease of access to results and procedures that require information to be repeated.
  • Team workload: documentation time, ease of finding the clinical record and perceived administrative burden. To compare experience, we repeat the same questionnaire before implementation and at six months.
  • Traceability and interoperability: the ability to reconstruct actions and access, availability of information across systems and time spent gathering evidence for audits. The analysis must take into account the requirements applicable to each institution.

An increase in reported events after digitalisation may reflect that situations which previously fell outside the system are now being recorded. That is why we analyse the quality of the records before concluding that care has worsened. Greater visibility also helps identify where we need to act.

Optimise hospital management with K2BHealth

Medical software ROI makes sense when it enables better decisions: recovering services, making use of available capacity and reducing tasks that take time away from care. The baseline and the KPIs show whether the project is moving in that direction and whether the improvements maintain the quality of care.

At K2BHealth we support institutions from the survey of their processes through to the monitoring of results. We identify improvement opportunities, define measurable objectives and use activity traceability and dashboards to guide adjustments. If you would like to assess how our Hospital Information System (HIS) can help your institution, request a meeting and let’s talk about the indicators you need to improve.

Keep reading

Start with the roadmap

Assessment, priorities and a phased plan for your organisation.

Let's talk